Accessories Adapter Black DIY For Makita 18V Li-ion Battery Replacement

Description

Product Description
Accessories Adapter Black DIY For Makita 18V Li-ion Battery Replacement
Product Description:
1. The battery adapter/connector has been tested and can be used with Makita 18V BL series lithium batteries.
2. Compatible battery: BL1800 series
3. Made by molds, not 3D printers, requiring a lot of welding and assembly
4. There is no built-in protection PCBA, so please take good care of the battery and don't expose it to hot weather
5. The adapter has been installed with 150 mm line 14
Applicable models: BL1415 BL1430 BL1430B BL1815 BL1815B BL1820 BL1820B BL1830 BL1830B BL1840 BL1840B BL1850 BL1850B BL1860 BL1860B BL1845 BL1890 BL1890B; 14.4V/18V lithium battery...
Note:
This adapter has not been used for a long time, please store it separately from the battery
The adapter cannot charge the Makita 18V battery. This is not a charger. It only outputs battery voltage and power directly from the battery.
It is forbidden to directly weld the copper core of the product, otherwise it will cause the product to be deformed and damaged
If you need to re-solder the cable, remove the copper core and solder
Product parameters:
Plastic: mold injection ABS+PC material
Outgoing wire length: about 150mm
Colour: Black
Wire gauge: wire 1332 14AWG (high temperature resistant)
Applicable models: Makita 18V BL
Precautions:
1. This is not a charger, it only outputs battery voltage and power directly from the battery.
2. Do not use this adapter to charge the battery. Do not short-circuit the battery or continuously consume more than 20 amperes of current. Disconnect the battery before the battery reaches 14 volts (extend battery life). Do not charge at 100% for a long time. It is recommended Store battery at 70% power (extend battery life)
Package list:
1 *Only 1 DIY adapter (not including battery)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Payment
We accept payment via Paypal only.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
Delivery details
We only
ship to confirmed Paypal addresses.
Please comfirm that your paypal address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Contact us
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.